Product SKUs
|
SSG-6048R-E1CR24H |
SuperServer
6048R-E1CR24H
(Black) |
Motherboard
|
Super X10DRH-iT
|
Processor/Cache
|
CPU |
Intel® Xeon®
processor E5-2600 v3 family (up to 145W TDP) *
Dual Socket R3 (LGA 2011) |
Cores / Cache |
Up to 18 Cores /
Up to 45MB Cache |
System Bus |
QPI up to 9.6 GT/s |
Note |
*
Please contact Supermicro Technical Support for additional information
about frequency optimized CPUs and specialized system optimization. |
System Memory
|
Memory Capacity |
16x 288-pin DDR4
DIMM slots
Up to 1TB ECC LRDIMM, 512GB ECC RDIMM |
Memory Type |
2133/1866/1600MHz
ECC DDR4 SDRAM 72-bit |
DIMM Sizes |
RDIMM: 32GB, 16GB,
8GB, 4GB
LRDIMM: 64GB, 32GB |
Memory Voltage |
1.2 V |
Error Detection |
Corrects
single-bit errors |
On-Board Devices
|
Chipset |
Intel® C612
chipset |
SAS |
SAS3 (12Gbps) via
LSI 3108 AOC; HW RAID
RAID 0, 1, 5, 6, 10, 50, 60 |
SATA |
SATA3 (6Gbps) with
RAID 0, 1, 5, 10 |
IPMI |
Support for
Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2400 BMC |
Network Controllers |
Intel® X540 Dual
Port 10GbE
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI) |
Graphics |
ASPEED AST2400 |
Input / Output
|
LAN |
2x RJ45 10GBase-T
LAN ports
1x RJ45 Dedicated IPMI LAN port |
USB |
2x USB 3.0 ports
(rear)
2x USB 2.0 ports (rear)
1x Type A |
VGA |
1x VGA port |
Serial Port / Header |
1x Fast UART 16550
port / 1 Header |
System BIOS
|
BIOS Type |
128Mb SPI Flash
EEPROM with AMI BIOS |
BIOS Features |
Plug and Play
(PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI |
Chassis
|
Form Factor |
4U Rackmount |
Model |
CSE-846BE1C-R920B
|
Dimensions and Weight
|
Width |
17.2" (437mm) |
Height |
7" (178mm) |
Depth |
26.5" (673mm) |
Weight |
Net Weight: 92 lbs
(41.7 kg)
Gross Weight: 55 lbs (24.9 kg) |
Available Colors |
Black |
Front Panel
|
Buttons |
Power On/Off
button
System Reset button |
LEDs |
Power status LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED
Power fail LED |
Expansion Slots
|
PCI-Express |
1x PCI-E 3.0 x16
slot
6x PCI-E 3.0 x8 slots
Slot 1 & 2 occupied by controller and JBOD Expansion Port |
Drive Bays
|
Hot-swap |
24x 3.5" Hot-swap
SAS3/SATA3 drive bays |
Optional |
2x 2.5" Hot-swap
HDD bays (rear) |
Backplane
|
SAS3/SATA3 single expander per backplane |
System Cooling
|
Fans |
2x 80mm hot-swap
rear exhaust cooling fans
Redundant cooling |
Power Supply with Power
Distributor
|
920W
high-efficiency AC-DC Redundant power supplies with PMBus and I2C |
AC Input |
100-240 V, 50-60
Hz, 11-4.5 Amp |
DC Output |
4 Amp @ +5V
standby
75 Amp @ +12V |
With Power Distributor |
+5V: 45 Amp
+3.3V: 24 Amp
-12V: 0.6 Amp |
Certification |
Platinum Certified |
Operating Environment /
Compliance
|
RoHS |
RoHS Compliant |
Environmental Spec. |
Operating
Temperature: 10°C to 35°C (50°F to 95°F)
Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing) |