Thông tin sản phẩm Power Supply Zippy M1K2-5AE0K2H
OUTPUT WATTAGE
1500W
BEST SOLUTION FOR
Server ,Workstation ,Storage System ,IPC ,Communication ,Networking
DIMENSION
410x106x41.3(mm)
16.41x4.17x1.59(inch)
INPUT SPEC
VOLTAGE: 100~264VAC FULL RANGE
FREQUENCY: 47~63HZ
INPUT CURRENT:15A (RMS) FOR 115 VAC / 10A (RMS) FOR 230 VAC
INRUSH CURRENT:15A MAX. FOR 115 VAC PER MODULE / 30A MAX. FOR 230 VAC PER MODULE(AT 25 DEGREES AMBIENT COLD START FOR EACH POWER UNIT)
PFC: UP TO THE TARGET OF 95%@115V & 90% @230V, FULL LOAD.( ONE NUIT POWER SUPPLY).
DC OUTPUT SPEC
Output Voltage | Output Current Min. | Output Current Max. | Regulation Load | Regulation Line | Output Ripple & Noise Max.[P-P] |
+5V | 0 | 36 | ±5% | ±1% | 50mV |
+12V | 0.2 | 125 | ±5% | ±1% | 120mV |
+3.3V | 0 | 31 | ±5% | ±1% | 50mV |
-12V | 0 | 0.5 | ±10% | ±1% | 120mV |
+5VSB | 0 | 3 | ±5% | ±1% | 50mV |
1. POWER MODULE TOTLA OUTPUT POWER NOT EXCEED 1200W FOR 100~132VAC. 2. POWER MODULE TOTLA OUTPUT POWER NOT EXCEED 1500W FOR 200~264VAC 3. +5V and +3.3V total output max : 210W 4. 90Vac~132Vac input: Once AC or PS_ON turn on power supply, the total max. power is requested to be less than 80% of MAX. LOAD. (refer to 9.2 Total max power V.S Voltage)
FEATURES
* TEMPERATURE RANGE:OPERATING 0℃~50℃, STORAGE -20℃~80℃ * HOLD UP TIME:WHEN POWER SHUTDOWN ALL THE DC OUTPUT VOLTAGE MUST BE MAINTAIN 11mS IN REGULATION LIMIT AT NORMAL INPUT VOLTAGE (70% LOAD) * THE MAXIMUM POWER SUPPLY SYSTEM EFFICIENCY SHALL BE 86%, MEASURED AT NOMINAL INPUT VOLTAGE 230V AND FULL LOADING * LEAKAGE CURRENT: 3.5mA. MAX. AT NOMINAL VOLTAGE 240 VAC AND 60Hz * REMOTE ON/OFF CONTROL * OVER POWER PROTECTION:105~150% MAX * OVER VOLTAGE PROTECTION: +5V→5.7~6.5V, +3.3V→3.7~4.3V, +12V→13.2~15V * SHORT CIRCUIT PROTECTION: +5V, +3.3V, +12V, -12V, +5VSB * OVER CURRENT PROTECTION: +12V:105~150% * SAFETY: MEET60950 UL&CUL, TUV, CCC ,UL/EN/IEC 62368 * WARNING METHOD: FALUT LED, TTL * THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.