Thông tin sản phẩm SSE-G2252P (52 ports; 48 w/ Power-over-Ethernet)
Layer 2 Ethernet Switch - SSE-G2252P
w/ Power-over-Ethernet
Highlights
|
• Layer 2
Switching
• Non-blocking connectivity
• 1U form factor for flexible installation |
Summary
|
• 48 RJ45
10/100/1000 ports and
• 4 SFP 1G ports
• Non-blocking connectivity
• Standard Layer 2 Features:
• IPV4 and IPv6, QoS, 256VLANs
• Jumbo Frame Support up to 9KB
• RJ45 Console Port for CLI: Web Management GUI, CLI
• Energy Efficient Ethernet (802.3az)
• Power-over-Ethernet (802.3at)
- Up to 30W per port / Up to 400W total PoE budget
• Power supply: 500W (87% efficiency)
• 1U form factor for flexible installation
• Dimensions (W x D x H): 440mm x 379mm x 43mm
• Weight: 11.7 lbs / 5.3 kg |
Specifications
|
Switching Features:
- 16K MAC address entries
- Auto negotiation on all ports
* Flow Control supported
* Provides IEEE 802.3x for full duplex mode
- 10/100Mbps mode > back pressure flow control half duplex mode
- Storm protection
* Broadcast
* Multicast
- Spanning tree
* IEEE 802.1D spanning tree
* IEEE 802.1s multiple spanning tree (32 instance)
* IEEE 802.1w rapid spanning tree
* Spanning Tree fast forwarding
* Loopback Detection
* Auto edge port
* BPDU filter/guard
* Root Guard
- VLANs support:
* IEEE 802.1Q VLAN
* Port-based VLAN
* MAC-based VLAN
* Protocol-based VLAN
- 16 entries per system
* IP-based VLAN
* 256 active VLANs
* Support private VLAN Edge (Traffic Segmentation)
* Voice VLAN
* Guest VLAN
* VLAN Trunking
* GVRP
* Supports Multicast VLAN Registration (MVR)*:
- 5 MVR group
- 256 MVR source group (shared with IPMC table)
- Double tagging:
* IEEE 802.1 Q-in-Q
* IEEE 802.1ad provider bridge
* Unqualified learning and forwarding
- IGMP:
* IGMP snooping v1/v2/v3
* IGMP v1/v2 querier
* IGMP immediate leave
* IGMP filtering/throttling
* IGMP snooping leave proxy
* IGMP v1/v2/v3 proxy
- Link Aggregation
* IEEE 802.3ad with LACP
* Manual trunking
* Up to 12 aggregation groups are supported, and up to 8 ports
per group
Security Features:
- Port Security (MAC-binding)
* Static port (MAC-based)
* Dynamic port (MAC-based)
- User/Password protected system management interface
* SNMP
* Web
* Telnet
- Access control list (512 rules)
* L2/L3/L4
* IP-MAC ACL
* Time-based ACL
- Extended IPv6 ACL
- RADIUS (RFC2138)
- TACACS+
- HTTPS/SSL
- SSH v1.5/v2.0 |
Specification (Continued)
|
Quality of Service (QoS):
- Provides 4 queues per port
- Priority queue scheduling scheme
* Strict priority
* Deficit weighted round robin
- IPv4/v6 DiffServ
* L2/L3/L4 Traffic Classification / Priority Management
* IEEE 802.1p (COS)
* DSCP/TOS
* TCP/UDP port number
* IP SA/DA
* MAC SA/DA
* IPv6
- Queuing
* Port based CoS
* IEEE 802.1p VLAN information based CoS
* IP ToS/IP precedence based CoS
* DSCP based CoS
* TCP/UDP port base CoS
* QoS marking
- Packet prioritization based on ingress/egress ports'
pre-defined value listed below
* Trusted
* IEEE 802.1p/Q tag
* ToS field tag
* IPv4 DSCP
* Ethernet type field
* TCP and/or UDP port numbers
* SA and/or DA IP address
* ToS Field Tag
- Traffic shaping
* IP based (all ports)
* Port based (all ports)
* Port based shaping QoS aware
- Per port bandwidth management
* Resolution 64KB
- Ingress/Egress metering at 64KB increments
* Ingress/egress policer
* Ingress and egress co-work
- CPU interface filtering
Management Features:
- RJ45-type console interface
- Management methods:
* Web-based
* Telnet (4 session)
* SNMP
- Software upgrade/download
- Multiple configuration file upload / download by TFTP and HTTP
- Dual image
- Auto upgrade
- IP address assignment
* Static IP assignment
* BOOTP and DHCP for IP address assignment
- DHCP functions
* DHCP client
* DHCP snooping
* DHCP Option 82 relay agent
* DHCP snooping Option 82
* DHCP dynamic provision option 66, 67
- DNS: Client, Proxy
- Telnet-Server
- SNMP v1/v2c/v3
- RMON
- Port mirroring
- VLAN mirroring
- MAC-based mirroring
PoE Features:
- Compliant with IEEE 802.3af-2003
- Compliant with IEEE 802.3at-2009
- PD classification
- PoE on 10/100/1000Base-T ports only (port 1~48)
- Automatic load sensing - power control circuitry automatically
detects power over Ethernet on access point before providing
power
- Power start/stop (remote sense)
- Maximum output power with internal power supply - 400W:
* Simultaneously 48 ports can support max. of 8.5W per port
* Simultaneously 26 ports can support max. of 15.4W per port
* Simultaneously 13 ports can support max. of 30W per port
- Power feeding over 1/2 and 3/6 data twisted pair of Cat. 5
UTP/STP cable
- Independent overload and short-circuit protection for each port
- LED indicators for power status per port
- Per port configuration
* Power on/off
* Port priority configuration
- Support AC disconnect
- Support IEEE 802.3af/IEEE 802.3at MIB for power over
Ethernet function
Operating Conditions:
- Operating temperature: 0 to 50°C |
Dimensions
|
Width |
17.3" (440mm) |
Depth |
11" (379mm) |
Height |
1.7" (43mm) |
Weight |
11.7 lbs (5.3 kg) |
Available Colors |
Black |
Standard Parts List (Included
in the box)
|
-
Switch
- Power Cord (US style)
- Console Cable
- CD-ROM with User's Manuals
- Quick-Install Guide
- Mounting flanges (2)
- Miscellaneous screws
- Rubber foot-pads |