KeyFeatures

1. Up to 8GB 1866MHz DDR3L Non-ECC SO-DIMM in 1 socket

2. Intel® Pentium™ Processor N4200 (6W, 4C)

3. Intel® Goldmont microarchitecture 14nm System-on-Chip

4. Dual GbE LAN with Intel® i210-AT

5. 1 M.2 B-Key 2280, 1 Full size Mini-PCI-E, 1 SATA 3.0

6. 1 HDMI, 1 VGA, 1 48-bit LVDS, Intel® HD Graphic 3 independent displays

7. 1 USB 3.1 Gen2 Type-C port, 2 USB 3.0 ports, 4 USB 2.0 ports, 4 COM ports, 1 SATA 3.0, 8-bit GPIO, SMBus

8. Supports on board TPM 2.0

9.Supports 12V DC power input

Specifications

Product SKUs

MBD-X11SAN            X11SAN

Physical Stats

Form Factor

3.5" SBC

Dimensions

5.7" x 4.0" (14.6cm x 10.16cm)

Processor/Cache

CPU     Intel® Pentium™ Processor N4200.

Single Socket FCBGA1296 supported, CPU TDP support 6W

System Memory

Memory Capacity Up to 8GB Unbuffered non-ECC SO-DIMM, DDR3-1866MHz, in 1 DIMM slot

Memory Type

DDR3L up to 1866Mhz 8GB

DIMM Sizes 2GB, 4GB, 8GB

Memory Voltage 1.35V

On-Board Devices

Chipset

System on Chip

SATA SoC controller for 1 SATA3 (6 Gbps) ports;

Network Controllers Dual LAN with Intel® Ethernet Controller I210-AT

Audio ALC 888S HD Audio

Graphics:  Intel® HD Graphics

Input / Output

SATA 1 SATA3 (6Gbps) port

LAN: 2 RJ45 Gigabit Ethernet LAN ports

USB

4 USB 2.0 ports (4 headers),

2 USB 3.0 ports (2 rear),

1 USB 3.1 ports ( + 1 Type C)

Video Output: 1 VGA port, 1 48-bit LVDS port, 1 HDMI port

Serial Port / Header

4 COM Ports (4 headers), (2 RS232, 2 RS232/422/485, RS-485 supports Auto flow control)

TPM

1 TPM Chip

Others

1 HD Audio header (Mic-in/headphone-Out)(Audio only support at 0~60C)

1 8-bit GPIO header

1 SMBus header

1 Panel backlight power header

1 Speaker

1 system Fan

Expansion Slots

PCI-E

1 Full size Mini-PCI-E (USB2.0 1,PCI-E Gen2 x 1)

1 M.2 2280 B-Key (PCI-E Gen2 x 1,SATA x 1)

M.2:  M.2 Interface: SATA and PCI-E 2.0 x1 and USB 2.0

Form Factor: 2280

Key: B-Key

System BIOS

BIOS Type

AMI UEFI

BIOS Features

Plug and Play (PnP)

DMI 2.3

ACPI 5.0

SMBIOS 2.7.1

UEFI 2.4 

Management

Software:  SuperDoctor® 5, Watchdog

Power Configurations: +12V DC Power Input

ACPI Power Management

Control of power-on for recovery from AC power loss

Force Power On by Jumper 

PC Health Monitoring

Voltage

+1.35V, +12V, +3.3V, +5V, 3.3V standby, System level control, System temperature, VBAT, VCGI

FAN

1x 4-pin fan header (up to 1 fan), Fan speed control, Low noise fan speed control, PWM fan speed control, System level control, Thermal control tachometer fan connectors

Temperature:  CPU thermal trip support

LED

Standby alert LED

Other Features

4-pin 12v DC power connector, ACPI power management, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, M.2 NGFF connector, RoHS, System level control, WOL