Description | Specifications |
Performance |
Switching capacity | 128 Gbps |
Forwarding rate | 95.23 Mpps |
Virtual Networks | 4 |
Stacking bandwidth | 160 Gbps |
Total number of MAC addresses | 32,000 |
Total number of IPv4 routes (ARP plus learned routes) | 14,000 (10,000 direct routes and 4,000 indirect routes) |
IPv4 routing entries | 4,000 |
IPv6 routing entries | 2,000 |
Multicast routing scale | 1,000 |
QoS scale entries | 1,000 |
ACL scale entries | 1,600 |
Packet buffer per SKU | 6 MB buffers |
Flexible NetFlow (FNF) entries | 16,000 flows |
DRAM | 4 GB |
Flash | 4 GB |
VLAN IDs | 4096 |
Total Switched Virtual Interfaces (SVIs) | 1000 |
Jumbo frames | 9198 bytes |
Features |
Switch fundamentals | Layer 2, Routed Access (RIP, EIGRP Stub, OSPF - 1000 routes), PBR, PIM Stub Multicast (1000 routes), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder |
Automation | NETCONF, RESTCONF, YANG, PnP Agent, PnP |
Telemetry and visibility | Model-driven telemetry, sampled NetFlow, SPAN, RSPAN |
Security | MACsec-128 |
Physical Specifications |
Chassis Dimensions | 1.73 x 17.5 x 13.8 Inches 4.4 x 44.5 x 35.0 Centimeters |
weight | 11.02 Pounds 5.0 Kilograms |
Mean time between failures (hours) | 587,800 |
Connectors |
Connectors and cabling | - 1000BASE-T ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling - 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling - 100BASE-FX, 1000BASE-SX, -LX/LH, -ZX, -BX10, dense wavelength-division multiplexing (DWDM) and Coarse Wavelength-Division Multiplexing (CWDM) SFP transceivers: LC fiber connectors (single-mode or multimode fiber) - 10GBASE-SR, LR, LRM (only C9200), ER, ZR, DWDM SFP+ transceivers: LC fiber connectors (single-mode or multimode fiber) - SFP+ connector - Cisco StackWise-160 stacking ports: copper-based Cisco StackWise cabling - Ethernet management port: RJ-45 connectors, 4-pair Cat 5 UTP cabling - Management console port: RJ-45-to-DB9 cable for PC connections,USB-C adaptor, USB adaptor |
Power connectors | Internal power supply connector: The internal power supply is an auto-ranging unit. It supports input voltages between 100 and 240 VAC. Use the supplied AC power cord to connect the AC power connector to an AC power outlet. |
Standards, Safety and compliance information |
Standards | EEE 802.1s IEEE 802.1w IEEE 802.1x IEEE 802.1x-Rev IEEE 802.3ad IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports IEEE 802.1D Spanning Tree Protocol IEEE 802.1p CoS prioritization IEEE 802.1Q VLAN IEEE 802.3 10BASE-T specification IEEE 802.3u 100BASE-TX specification IEEE 802.3ab 1000BASE-T specification IEEE 802.3z 1000BASE-X specification IEEE 802.3bz 10G BASE-T specification RMON I and II standards SNMPv1, v2c, and v3 |
Safety certifications | - IEC 60950-1 - UL 60950-1 - CAN/CSA C22.2 No. 60950-1 - EN 60950-1 - AS/NZS 60950.1 - Class I Equipment |
Electromagnetic emissions certifications | - 47 CFR Part 15 - CISPR 22 Class A - CISPR 32 Class A - CNS 13438 - EN 300 386 - EN 55022 Class A - EN 55032 Class A - EN61000-3-2 - EN61000-3-3 - ICES-003 Class A - KN 32 - TCVN 7189 Class A - V-3 Class A - CISPR 24 - EN 300 386 - EN 55024 - KN 35 - TCVN 7317 |
Environmental | Reduction of Hazardous Substances (ROHS) 5 |